FTW360 Conductive Point level detection

Product Item : FTW360-G1XGD1
Category： Level
Measuring Principle:Conductive
Characteristic / Application:Compact limit switch for pump protection, Active build up compensation, Flush mounting
Main wetted parts:1.4571, PTFE
Process connection:G3/4
INQUIRY EMAIL

Conductive Point level detection Pump Protection FTW360

Compact flush-mounted probe

The FTW360 is made for detection of liquids on the suction side of a pump for dry run protection. It operates in all conductive liquids, sludges and pastes that do not form an insulated build-up on the wall of the piping (e.g. oil film). The unit is also suitable for minimum or maximum detection in tanks.

Benefits

Simple and reliable solution also for adhesive or viscous products
Cost-effective probe for conductive liquids
Universal electronics for AC and DC voltages

Field of application

For detection of liquids on the suction side of a pump for dry run protection. For conductive liquids, sludges and pastes that do not form an insulated
build-up on the wall of the piping (e.g. oil film). For minimum or maximum detection in tanks.

Process connection: Thread
Sensor length: Flush-mounted
Temperature: -20 to +100°C (-4 to +212°F), CIP to 130°C, for ½ h
Pressure: -1 to 10bar (-14.5 to 145psi)

Features and specifications

Measuring Principle	Conductive
Characteristic / Application	Compact limit switch for pump protection, Active build up compensation, Flush mounting
Supply / Communication	21V ... 253V AC 20V ... 200V DC
Ambient temperature	-20 °C ... 60 °C (-4 °F ... 140 °F)
Process temperature	-20 °C ... 100 °C (-4 °F ... 212 °F)
Process pressure absolute / max. overpressure limit	Vacuum ... 10 bar (Vacuum ... 145 psi)
Min. conductivity of medium	10 µS/cm
Main wetted parts	1.4571, PTFE
Process connection	G3/4
Communication	Relay