Home      Products     Endress+Hauser     Analysis       CCS240 Analog disinfection sensor
  • CCS240 Analog disinfection sensor

CCS240 Analog disinfection sensor

  • Product Item : CCS240-N
  • Category: Analysis
  • Measuring Principle:Free chlorine
  • Application:Water, process
  • Characteristic:Amperometric measurement of free chlorine.
  • temperature sensor:With NTC-temperature sensor
  • INQUIRY   EMAIL

Analog disinfection sensor CCS240

Standard sensor for industrial and pool water treatment


CCS240 is the analog sensor for standard measurement of chlorine dioxide. It delivers reliable values even if fluctuations in flow or conductivity occur and allows control of the disinfection loop so that the water is free of germs. At the same time, the sensor is designed for long calibration and service intervals reducing your maintenance effort.

Benefits

  • Recalibration intervals approx. 1 to 4 months under constant operating conditions

  • Easy membrane replacement thanks to prefabricated membrane cap

  • Measured values are not affected by conductivity fluctuation

  • Measurement virtually independent of flow rate in the range above 30 l/h

  • Zero-point calibration not required. No complex installation of an activated carbon filter, as found with open chlorine sensors.

Field of application

CCS240 measures chlorine dioxide in:

  • Drinking water
    - Monitoring, control and optimization of disinfection processes

  • Industrial process water
    - Process applications, e.g. bottle rinsing machines

  • Utilities of all industries
    - All disinfection measuring points

Features and specifications

Conductivity  
Measuring Principle Chlorine dioxide
Application Waste water, pool
Characteristic Amperometric measurement of dissolved Chlordioxide
Measurement range 0,05 - 20ppm Chlordioxide;
Measuring principle - closed (membrane covered) measuring cell.
- Reduction of Chlordioxid (ClO2) to Chlorid at the cathode at appr. 120mV.
Design Closed amperometric 2-electrode measuring cell with PTFE membrane
Material Sensor shaft : PVC
Membrane : PTFE
Membrane cap : PBT (GF30); PVDF
Dimension Diameter : appr. 25mm
Length : 160mm
Process temperature 2°C ... 45°C
Process pressure 0bar - 1bar
temperature sensor With NTC-temperature sensor
Connection Fixed cable