Wika PGT23.100, PGT23.160 Bourdon tube pressure gauge with output signal

Product Item : PGT23.100
Category： Wika
Applications:Acquisition and display of processes
Output signal:4 ... 20 mA
display:analogue on-site
Process industry: Chemical industry, petrochemical industry, oil and gas, power generation, water and wastewater
INQUIRY EMAIL

无标题文档

PGT23.100, PGT23.160 Bourdon tube pressure gauge with output signal

For the process industry, safety version, NS 100 and 160

Applications

Acquisition and display of processes
Output signal 4 ... 20 mA for the transmission of process values to the control room
Easy-to-read, analogue on-site display needing no external power
Process industry: Chemical industry, petrochemical industry, oil and gas, power generation, water and wastewater

Special Features

No configuration necessary due to "plug-and-play"
Signal transmission per NAMUR
Measuring ranges 0 ... 0.6 bar to 0 ... 1,600 bar
Easy-to-read analogue display with nominal size 100 or 160
Safety version S3 per EN 837

Description

Wherever the process pressure has to be indicated locally and, at the same time, a signal transmission to the central control or remote centre is desired, the model PGT23 intelliGAUGE® (patent, property right: e.g. DE 202007019025) can be used.

Through the combination of a mechanical measuring system and electronic signal processing, the process pressure can be read securely, even if the voltage supply is lost.

The intelliGAUGE model PGT23 fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the working pressure of pressure vessels. An additional measuring point for mechanical pressure display can thus be saved.
The model PGT23 is based upon a model 23X.30high-quality, stainless steel safety pressure gauge.

The all welded and robust Bourdon tube measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, 4 … 20 mA, is produced.

The electronic WIKA sensor, integrated into the high-quality pressure gauge, combines the advantages of electrical signal transmission with the advantages of a local mechanical display.

The measuring span (electrical output signal) is adjusted automatically along with the mechanical display, i.e. the scale over the full measuring range corresponds to 4 … 20 mA.

Technical Information

Specifications according to data sheet	PV 12.04
Measuring system	stainless steel
Case	stainless steel with solid baffle wall and blowout back
Accuracy class	class 1.0
Standard article
Output signal	4 ... 20 mA, 2-wire
Unit of outer Scale	bar
Electrical connection	L-Plug DIN EN 175201-804 6-pin + PE sidewise