Digital optical sensor based on the principle of fluorescence quenching, with or without Memosens protocol
Application
• Wastewater treatment plants
– Oxygen measurement and regulation in the activated sludge basin for a highly
efficient biological cleaning process
– Monitoring the oxygen content in the wastewater treatment plant outlet
• Water monitoring
Oxygen measurement in rivers, lakes or seas as an indicator of the water quality
• Water treatment
Oxygen measurement for status monitoring, e.g. of drinking water (oxygen
enrichment, corrosion protection etc.)
• Fish farming
Oxygen measurement and regulation for optimum living and growth conditions
Your benefits
• Optical technology:
– Minimum maintenance
– Maximum availability
• Sensor with digital signal processing:
– Calibration data saved in sensor
– High degree of EMC protection thanks to digital communication with the
transmitter
• Extended maintenance intervals and a high degree of longterm stability
• Intelligent self-monitoring guarantees reliable measured values
• No flow needed - measurement possible in still water
• COS61D - the Liquiline sensor
– Plug&Play: Safe communication based on Memosens protocol
– Optionally with M12 plug for fast connection to the transmitter
• COS61 - the Liquisys sensor
– Compatible with tried-and-tested COS31 with COM2x3W: Easy measuring point
changeover to optical technology
– Compatible with COS41 with COM2x3D with conversion kit
Endress+Hauser COS61-A1F0
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Measuring system
|
COS61D
A complete measuring system consists of the following components at least:
• Oxymax COS61D oxygen sensor
• Liquiline CM44x multi-channel transmitter
• Sensor cable, optionally available with M12 connector
• Assembly, e.g. flow assembly COA250, immersion assembly CYA112 or
retractable assembly COA451
Optionally:
• Assembly holder Flexdip CYH112 for immersion operation
• Extension cable CYK11
• Cleaning system
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 Sensor cable
2 Liquiline CM44x
3 Flexdip CYH112
|
4 Basin rim with railing
5 Oxymax COS61D
6 FlexdipCYA112
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
COS61
A complete measuring system comprises:
• Oxymax COS61 oxygen sensor
• Transmitter, e.g. Liquisys COM2x3-W
• Sensor cable
• Assembly, e.g. flow assembly COA250, immersion assembly CYA112 or
retractable assembly COA451
Optionally:
• Flexdip CYH112 assembly holder for immersion operation
• VS junction box (for cable extension)
• Cleaning system
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Input
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Measured values |
Dissolved oxygen [mg/l, µg/l, ppm, ppb or %SAT or hPa]
|
Measuring ranges
|
Measuring ranges apply for 25 ˚C (77 ˚F) and 1013 hPa (15 psi)
With Liquiline CM44x, CM44xR, CM44P or with Liquisys COM2x3-W:
• 0 to 20 mg/l
• 0 to 400 hPa
• 0 to 200 % SAT
|
Power supply |
|
Electrical connection
|
COS61D
Connection data
• Sensor cable connected directly to the terminal connector of the basic module
• Optional: sensor cable plug connected to the M12 sensor socket of the transmitter
With this type of connection, the transmitter is already wired at the factory.
|
|
|
COS61 to field device
You connect the sensor directly to the transmitter via the special measuring cable with SXP
connector.
|
|
|
|
Operating life of sensor cap
>2 years (under reference operating conditions, protect against direct sunlight)
|
COV61-1A1 replace 51518598 use for COS61 |
COV61-2C1 replace 51518598 use for COS61D with serial number ending O01 |
Name: Sophie Wang
Mobile:+86 18681453433
Tel:+86 18681453433
Whatsapp:8613244706006
Email:sophie@meterbook.com
Add:Jingying Plot,Baoan District,Shenzhen City,Guangdong Province,China
We chat